1. What is Auger Tube Length?

The auger tube length is the working length of the auger after accounting for the drive mechanism. It's calculated by subtracting the drive length from the total length of the auger system.

2. How Does the Calculator Work?

The calculator uses the simple formula:

Where:

• Total Length — The entire length of the auger system
• Drive Length — The length occupied by the drive mechanism

Explanation: This calculation determines the effective working length of the auger that can be used for material transport.

3. Importance of Tube Length Calculation

Details: Accurate tube length calculation is crucial for proper auger system design, ensuring sufficient working length for material transport while accounting for drive mechanism requirements.

4. Using the Calculator

Tips: Enter total length and drive length in meters. Both values must be positive numbers, with total length greater than drive length.

5. Frequently Asked Questions (FAQ)

Q1: What units should I use for measurement?
A: The calculator uses meters, but you can use any unit as long as both measurements are in the same unit.

Q2: What if my drive length is longer than total length?
A: This would indicate an error in measurement, as drive length should always be less than total length.

Q3: Does this calculation account for auger flighting?
A: No, this is a basic length calculation. Flight design would require additional calculations.

Q4: How precise should my measurements be?
A: For most applications, measurements to the nearest centimeter (0.01m) are sufficient.

Q5: Can I use this for helical screw calculations?
A: Yes, the same principle applies to helical screw conveyors when calculating working length.